Page 1 of 1
Cant Install twilight hack! HELP!
Posted:
Thu Jan 01, 2009 10:54 pmby drakex
I got the game, I got the SD Card package with the Installation of the Homebrew channel and the Twilight hack, I copy the file to the Wii Saved Games and then start the game, I am able to speak to the guy and the installation starts, but right off when it should install it it says that the boot.elf does not work, neither the boot.dol
I am confused, after that the Wii doesnt work, HELP! what am I doing wrong, I created the package and put it in the SD Card, after that I dont know what I am missing!
Posted:
Fri Jan 02, 2009 12:41 amby monkeymaximus
try creating a new package? also double check that the properties for the boot.elf and boot.dol make sense.
Posted:
Fri Jan 02, 2009 12:46 amby drakex
Already tried 3 different packages, even went to the lowest level of all just the homebrew package, this is what I get...
Flushing IPC transactions... done.
Closing file de3scriptors... done
releasing STM callback... old callback released!
OK
Getting SD Card status: 0000001
sd_reset_card(): got reply = b36800000
card status: 00000700 STANDBY
Selecting Card
Card Status; 00000900 transfer
sd_set_blocklength 512
sd_set_buswidth()
sd card detected
USBgecko serial interface not detected
Reading Fat
OEM Name: 0 bytes/sector, 0 sectors/cluster, 0 reserved sectors, 0 fats, fat32.
fat size =0
fat starts at sector 0x1
reading boot.dol
boot.dol not found (-1) reading boot.elf
failed to read boot.elf (-1)
No Code found to load, hanging.
Acording to this darned thing! MY SD card is either damage, but my PC can read it and has no problem, I am downloading the ISO as I have a Wiikey to see if I can install it from there. Let me know if someone had the same problem as me, thanks!
Posted:
Fri Jan 02, 2009 12:55 amby monkeymaximus
how is your sd card formatted? is it a wii compatible format?
Posted:
Fri Jan 02, 2009 1:04 amby drakex
FAT... normal plain old FAT, not FAT32 and is a sandisk, I am able to copy the save file from the WiiHack!
Posted:
Mon Jan 05, 2009 11:04 amby -Rubicante-
Consider yourself lucky, I cannot even copy the hack from my SD card to the Wii.
I also use a SanDisk (2gb) which is FAT (whatever that means). My Wii is firmware version 3.4U.
Posted:
Mon Jan 05, 2009 6:27 pmby brentbizzle
I have heard of some SD cards not working in some people's Wii. I would recommend trying a friend's SD card, or going out and getting a cheap one. SD cards are pretty cheap these days.