Page 1 of 1

help me!!!!

PostPosted: Mon Jan 16, 2006 4:46 pm
by jtwright
can some1 please help on this. ok i am having trouble on the internet browser because every time i try to start a new connection it says internal error. :?

PostPosted: Mon Jan 16, 2006 4:50 pm
by Surenix
Hmm, connection error...

-Is your WLAN on? Do you have a right WEP number if you have one. Is the SSID number right?

I don't know if this is one but someone said that you must have at lease a 50-80% or connection power to run the Internet browser. Also, what Browser are you running? The 2.00 or the 1.50 ones?

PostPosted: Mon Jan 16, 2006 4:51 pm
by shadox
Yeah and you have to have wireless internet to run it....

PostPosted: Mon Jan 16, 2006 4:52 pm
by Surenix
PStationP wrote:Yeah and you have to have wireless internet to run it....


Also meaning a wireless router of any sort.

PostPosted: Mon Jan 16, 2006 4:54 pm
by jtwright
yes the wan is on.
I don't know where to find that at.
yes.
2.00

PostPosted: Mon Jan 16, 2006 4:58 pm
by shadox
jtwright wrote:yes the wan is on.
I don't know where to find that at.
yes.
2.00


what don't you know where to find... if its the percent, just look at your internet connection, and to the right of it should be the percent.. if its a router, its a box that tranfers internet through your house (like if you have 2 computers)

PostPosted: Mon Jan 16, 2006 4:59 pm
by Surenix
Hmm, something isn't right...

It should work if you have all the above...unless it's a really bad connection...

PostPosted: Fri Jan 20, 2006 6:14 pm
by nemesis91101
ive been emulating firm 2.0 and also get internal error and im sure thats has to do with the firm files but if it does ur screwed cuz ur firm is read only i can erase 2.0 off mine.I hope that isnt it. :cry:

u mite try to restore factory settings and make a new connection in network settings.

PostPosted: Fri Jan 20, 2006 6:31 pm
by Mailas
yea but to get the ip adress for example,:
Go to the start menu
Go To Run

type in cmd

then type in ipconfig

Just an example for ur ip but to get ur wep key, u need a wireless router and you need the password from when u got it.

PostPosted: Fri Jan 20, 2006 6:42 pm
by nemesis91101
if u know the wep key connect to ur router and type in the default gateway number, which is usually 192.168.1.1 in ur net address bar as http://192.168.1.1 and take off the wep password and try ur psp agen.

PostPosted: Fri Jan 20, 2006 6:45 pm
by shadox
i think he got it to work...