Brewology

Good day, i need help on snes emulator while uo_snes works for me it run games a bit slow can i adjust the setting? and pls.tell me how i'm new to this.what should i change to make it a bit faster?

And another thing i was trying to install snespsp_tyl but i get an error and corrupted file i hope pspbrew can add it to their brewpack generator sure is nice to use.no corruption and all files are working.

since it sounds like uo_snes is working for you...i am assuming you have firmware 1.5 correct?

uo_snes i had to set to a freamrate skip of 3 to have it run bout the same speed of the snes....give that a try. but if you have tly already then toss uo. tyl runs smooth on all games with no framerate skipping...or maybe 1.

with tyl you will get a corrupted data file on your memory stick...but don't worry....there will be another flie on your stick for the emulator...select that and boot it up, and you will be fine. a lot of emulators will give you corrupted data files. if you are getting a lot of them then look into a file organizer to pust the corrupted data to the bottom of the list.

hope that helps...

^^^thats all right but make sure u put ur cpu speed to 333mhz

thanks for the reply but can you please tell me how to set the cpu speed? i saw a post that say use the analog stick to change but mine's not working.is there an option like in a real snes emulator on pc?sorry for the newbie question i'm really new to this and yes my firmware is 1.5v

While running the emulator, you push left on the joy stick and then sscroll down to CPU speed and move it to the right until it is at 333MHZ

thanks for the info i'll try that

also dont forget to fix the frame skip also i usually set mine to 7 or 8 fps

Oh yeah...Just set it to auto....by pressing up and down on the joystick

it works better if you set it yourself

7-8 frameskip of tyl? i have mine at 1 and it runs like a snes....heck...my super metroid is at 0 and it runs like normal.....with slowdown only occuring during the spotlights in the beginning.