2.5/2.6 Downgrader FINAL
Posted: Fri Jun 30, 2006 9:01 pmName: 2.5/2.6 Downgrader FINAL
Author: Dark Alex, Mathelieh,Yoshiro
Version: .5 FINAL
Firmware: 2.50/2.60
Source: PSPUpdates
Download: http://www.qj.net/2-5-2-6-Downgrader-FINAL-Released-/pg/49/aid/57717
Yes, you have read the title right - 2.50/2.60 Downgrader. Dark_Alex, along with Mathieulh and Yoshihiro from SonyXTeam, have released the first working 2.50/2.60 downgrader. Most credit goes to Dark_Alex (as said by Mathieulh) as he is the founder of the downgrader. Also, we would all like to give our thanks to Hitchhikr for the exploit that made this all possible. We have seen several betas over the past few days, several of which have been confirmed as non-working. However, just a few moments ago, Mathieulh released a beta version of the upcoming v5 of the downgrader. Dark_Alex is currently asleep as I am typing this, and thus can not release the final version (non-beta). If you choose to use this downgrader, use it at your own risk!! This is still a beta version!! A lot of people are reporting success, but please, try at your own risk!
The IRC (Internet Relay Chat) is full of discussion over this downgrader and we are right there, getting every bit of information for you. The main discussions occur at Fanjita's channel (join #fanjita on Toc2rta). Now, you are probably wondering how the downgrader works after the previous attempts failed. Mathieulh says it best in the release thread - "It uses some Sony libraries found in the 1.50 updater to perform the most critical steps, the logical format of the flash, and the ipl writing. See technical details for more info about how it works." The technical details can be found in the release thread.
Now, you are all wondering - "Well, how the "hell" do I use this?" Here's your answer-
The downgrade process is separated between two people, a 1.50 user and you (2.50/2.60 user). The 1.50 user must own a 1.50 firmware PSP and will have to follow simple steps to obtain some files for you. The instructions are as follow -
Before downgrading, make sure you meet the following requirements -
Your PSP is not a TA-082 (If you do have this PSP version, it may result in a brick)
You do not have a factory 2.5/2.60 PSP (DG only works on updated PSP's)
1.50 User Instructions
1. Copy the folders downhelper and downhelper% from the folder 1.50 HELPER folder to /PSP/GAME/ in your memstick.
2. Obtain the 1.50 update and put it in /PSP/GAME/UPDATE in your memstick. You may find the 1.50 update in our download site here.
3. Init the downhelper program.
4. It will dump your flash and some files from the updater eboot to the memstick. (These files are illegal under US copyright laws, so please do not distribute them in the comments or on our forums)
5. After that, the program will exit. You can now delete the updater from /PSP/GAME/UPDATE
6. You'll notice that you have a new folder in the root of your memstick called "DOWNDATER".
7. That's the folder you'll have to send to a 2.50/2.60 to let him test the downgrade.
2.50/2.60 User Instructions
1. Copy the folder the DOWNGRADER/2.50/DOWNDATERTEST if you have 2.50
2. or DOWNGRADER/2.60/DOWNDATERTEST if you have 2.60 to /PSP/GAME/ in your memstick
3. Wait for someone with 1.50 to pass you a folder called DOWNDATER and copy it to the root of your memstick.
4. Init GTA and the eLoader
5. In the eLoader menu, choose the downdater test. WARNING: the program won't output any display and any warnings, it will init the downgrader process inmediatelly.
6. You'll see that your memstick flashing. That means that your psp is being flashed from the memstick.
7. You won't see any type of output in the screen (this is for safety). When the memstick finishes of flashing, WAIT at least a minute, and then reinit your psp by holding the power button.
8. That's all. If all went right, you'll have 1.50. If it went less good, you'll still have 2.50/2.60. If all went wrong, you'll have a bricked psp(except in the case you have the modchip) Remember that you have accepted that risk.
Password for downloads (when you extract) is - I_USE_AT_MY_OWN_RISKS
Author: Dark Alex, Mathelieh,Yoshiro
Version: .5 FINAL
Firmware: 2.50/2.60
Source: PSPUpdates
Download: http://www.qj.net/2-5-2-6-Downgrader-FINAL-Released-/pg/49/aid/57717
Yes, you have read the title right - 2.50/2.60 Downgrader. Dark_Alex, along with Mathieulh and Yoshihiro from SonyXTeam, have released the first working 2.50/2.60 downgrader. Most credit goes to Dark_Alex (as said by Mathieulh) as he is the founder of the downgrader. Also, we would all like to give our thanks to Hitchhikr for the exploit that made this all possible. We have seen several betas over the past few days, several of which have been confirmed as non-working. However, just a few moments ago, Mathieulh released a beta version of the upcoming v5 of the downgrader. Dark_Alex is currently asleep as I am typing this, and thus can not release the final version (non-beta). If you choose to use this downgrader, use it at your own risk!! This is still a beta version!! A lot of people are reporting success, but please, try at your own risk!
The IRC (Internet Relay Chat) is full of discussion over this downgrader and we are right there, getting every bit of information for you. The main discussions occur at Fanjita's channel (join #fanjita on Toc2rta). Now, you are probably wondering how the downgrader works after the previous attempts failed. Mathieulh says it best in the release thread - "It uses some Sony libraries found in the 1.50 updater to perform the most critical steps, the logical format of the flash, and the ipl writing. See technical details for more info about how it works." The technical details can be found in the release thread.
Now, you are all wondering - "Well, how the "hell" do I use this?" Here's your answer-
The downgrade process is separated between two people, a 1.50 user and you (2.50/2.60 user). The 1.50 user must own a 1.50 firmware PSP and will have to follow simple steps to obtain some files for you. The instructions are as follow -
Before downgrading, make sure you meet the following requirements -
Your PSP is not a TA-082 (If you do have this PSP version, it may result in a brick)
You do not have a factory 2.5/2.60 PSP (DG only works on updated PSP's)
1.50 User Instructions
1. Copy the folders downhelper and downhelper% from the folder 1.50 HELPER folder to /PSP/GAME/ in your memstick.
2. Obtain the 1.50 update and put it in /PSP/GAME/UPDATE in your memstick. You may find the 1.50 update in our download site here.
3. Init the downhelper program.
4. It will dump your flash and some files from the updater eboot to the memstick. (These files are illegal under US copyright laws, so please do not distribute them in the comments or on our forums)
5. After that, the program will exit. You can now delete the updater from /PSP/GAME/UPDATE
6. You'll notice that you have a new folder in the root of your memstick called "DOWNDATER".
7. That's the folder you'll have to send to a 2.50/2.60 to let him test the downgrade.
2.50/2.60 User Instructions
1. Copy the folder the DOWNGRADER/2.50/DOWNDATERTEST if you have 2.50
2. or DOWNGRADER/2.60/DOWNDATERTEST if you have 2.60 to /PSP/GAME/ in your memstick
3. Wait for someone with 1.50 to pass you a folder called DOWNDATER and copy it to the root of your memstick.
4. Init GTA and the eLoader
5. In the eLoader menu, choose the downdater test. WARNING: the program won't output any display and any warnings, it will init the downgrader process inmediatelly.
6. You'll see that your memstick flashing. That means that your psp is being flashed from the memstick.
7. You won't see any type of output in the screen (this is for safety). When the memstick finishes of flashing, WAIT at least a minute, and then reinit your psp by holding the power button.
8. That's all. If all went right, you'll have 1.50. If it went less good, you'll still have 2.50/2.60. If all went wrong, you'll have a bricked psp(except in the case you have the modchip) Remember that you have accepted that risk.
Password for downloads (when you extract) is - I_USE_AT_MY_OWN_RISKS