Post Wed Mar 09, 2011 9:27 am

PS3ita 3.55 CFW Released: Goodbye fu*kpsn, Access Full PSN

If there was ever a reason to upgrade past Kmeaw CFW, PS3ita CFW is it. The new PS3ita 3.55 CFW automatically gives you full access to PSN without the use of external tools such as F*ck PSN, DNS, Charles etc..
Features:

The firmware is based on that of Kmeaw, but have added two small patches that allow access to the PSN!

Access is not immediate need any PC to serve as a “broker” and programs like charles fu*kPsn or do not serve
The PS3 is “set” to believe the PSN have the firmware installed 3:56.

I state that the risk remains and I will BAN PS3ita We assume no responsibility!
It’s up to you to decide whether or not to make use of the PSN and to install CFW with the following risks that entails!

Now comes the installation tutorial, below tells you how to create your own CFW PUP, but like before you can also download a pre-made PUP and use that too.
Installation:

1.Unless you have not already done so, download and flash the firmware on your PS3 3:55 ORIGINAL SONY:Here

2.Download the patch to create the CFW PS3ita (patch.diff):Here

3.Now it’s time to patch the firmware 3:55 ORIGINAL SONY.

Is easy to apply, download the following program (CFWPatcher_Installer.exe):Here

Install and run it.

Click File on the second button as marked in the image below and select the firmware you downloaded 3:55 ORIGINAL Sony 1 in the guide
firmwareoriginale1.png
firmwareoriginale1.png (3.73 KiB) Viewed 4614 times

Now click the third button on the File and select the folder where you want to save the CFW that will be created
destinazione2.png
destinazione2.png (4.34 KiB) Viewed 4614 times

Finally on the fourth button press File, select the patch (patch.diff) and click Execute
patchdaapplicare3.png
patchdaapplicare3.png (4.33 KiB) Viewed 4614 times

4.Wait for the program to finish creating your beautiful custom firmware.

5.Once the CFW verified that all worked out by comparing the hash:

-Download the following program: Md5Checker
- Run the program (you have to extract it from zip), click on the Add button and select the CFW.

Wait a moment, and under “Current MD5″ will be a number, and check segnatevelo is identical to this: c82e3d857775c460a804f08b4cb33940 (you do not take into account whether the letters are case-sensitive)
If the number matches means that your PUP is “healthy”!
6.We go to the PS3, plug the USB device and with the standard method of 6b.installing the CFW-PS3ita.
If you say that you have already upgraded to the latest software we need to go into RECOVERY MODE
Here is the procedure for access:
- Put the PS3 in standby (red LED)
- Hold down the power button: the system will turn on and turn off at the third beep
- Once off the PS3, hold down the power button again, you will hear 2 beeps and beeps twice
- At this point you will be prompted to connect the controller to the USB port
- Press the PS
- If you present a menu with the following options:
• Restart System: Please restart the PlayStation 3.
• Restore Default Settings: Reset all system settings to default
• Restore File System: Check any system files corrupted or missing.
• Rebuild Database: Rebuilds the OS PLAYSTATION 3.
• Restore PS3 System: reset: erase everything and start again from the factory defaults.
• System Update: Update the PLAYSTATION 3 firmware with a user-supplied

This is highlighted in red is the option for you, put the USB and install the CFW-PS3ita.

Your done, enjoy. Remember you use PSN at your OWN risk of getting banned.
[VIA PS3ITA] - Thanks to iDelete for original news tip/post

Read more: http://www.ps3hax.net/2011/03/ps3ita-3- ... z1G7jd7jHA
If there was ever a reason to upgrade past Kmeaw CFW, PS3ita CFW is it. The new PS3ita 3.55 CFW automatically gives you full access to PSN without the use of external tools such as F*ck PSN, DNS, Charles etc..
Features:

The firmware is based on that of Kmeaw, but have added two small patches that allow access to the PSN!

Access is not immediate need any PC to serve as a “broker” and programs like charles fu*kPsn or do not serve
The PS3 is “set” to believe the PSN have the firmware installed 3:56.

I state that the risk remains and I will BAN PS3ita We assume no responsibility!
It’s up to you to decide whether or not to make use of the PSN and to install CFW with the following risks that entails!

Now comes the installation tutorial, below tells you how to create your own CFW PUP, but like before you can also download a pre-made PUP and use that too.
Installation:

1.Unless you have not already done so, download and flash the firmware on your PS3 3:55 ORIGINAL SONY:[url=http://www.multiupload.com/APSUARN997]Here[/url

2.Download the patch to create the CFW PS3ita (patch.diff):Here

3.Now it’s time to patch the firmware 3:55 ORIGINAL SONY.

Is easy to apply, download the following program (CFWPatcher_Installer.exe):Here

Install and run it.

Click File on the second button as marked in the image below and select the firmware you downloaded 3:55 ORIGINAL Sony 1 in the guide

Now click the third button on the File and select the folder where you want to save the CFW that will be created
Finally on the fourth button press File, select the patch (patch.diff) and click Execute
4.Wait for the program to finish creating your beautiful custom firmware.

5.Once the CFW verified that all worked out by comparing the hash:

-Download the following program: Md5Checker
- Run the program (you have to extract it from zip), click on the Add button and select the CFW.

Wait a moment, and under “Current MD5″ will be a number, and check segnatevelo is identical to this: c82e3d857775c460a804f08b4cb33940 (you do not take into account whether the letters are case-sensitive)
If the number matches means that your PUP is “healthy”!
6.We go to the PS3, plug the USB device and with the standard method of 6b.installing the CFW-PS3ita.
If you say that you have already upgraded to the latest software we need to go into RECOVERY MODE
Here is the procedure for access:
- Put the PS3 in standby (red LED)
- Hold down the power button: the system will turn on and turn off at the third beep
- Once off the PS3, hold down the power button again, you will hear 2 beeps and beeps twice
- At this point you will be prompted to connect the controller to the USB port
- Press the PS
- If you present a menu with the following options:
• Restart System: Please restart the PlayStation 3.
• Restore Default Settings: Reset all system settings to default
• Restore File System: Check any system files corrupted or missing.
• Rebuild Database: Rebuilds the OS PLAYSTATION 3.
• Restore PS3 System: reset: erase everything and start again from the factory defaults.
• System Update: Update the PLAYSTATION 3 firmware with a user-supplied

This is highlighted in red is the option for you, put the USB and install the CFW-PS3ita.

Your done, enjoy. Remember you use PSN at your OWN risk of getting banned.
[VIA PS3ITA]- Thanks to iDelete for original news tip/post

Read more: http://www.ps3hax.net/2011/03/ps3ita-3- ... z1G7jd7jHA

Source: PS3HAX

Here is a pre-patched .PUP http://www.multiupload.com/074WGP8GVP
I have used this and had no problems, to be safe download MD5CHECKER to make sure.Also if you used a PSN spoofer to 3.56 make sure you restore it back to 3.55.
ImageImage
Image